Zero Unplanned
Downtime.
Reactive repairs cost 4x more than preventative maintenance. Zhenke provides complete Service Kits & Overhaul Parts for Kalmar, Toyota, and Sany fleets. From 500-hour filter changes to 20,000-hour engine rebuilds.
SERVICE KIT INVENTORY
THE MAINTENANCE LIFECYCLE
Maximize ROI on your heavy machinery by following OEM-recommended service intervals with Zhenke certified parts.
Preventative
Oil filters, fuel water separators, and grease points. Keep the bloodline clean.
Performance
Transmission fluid, hydraulic return filters, and brake inspections. Ensure smooth operation.
Mid-Life
Injectors, turbochargers, and water pumps. Restore lost power and efficiency.
Overhaul
Complete engine rebuilds (pistons, liners) and cylinder resealing. A new lease on life.
HYDRAULIC INTEGRITY RESTORED
Prevents internal bypass (drift)
Main pressure barrier (400 Bar)
Excludes dust & moisture
STOP THE LEAK
A leaking lift cylinder isn’t just messy—it’s a safety hazard. Zhenke Hydraulic Seal Kits use Parker/Polyurethane compounds rated for -40°C to +110°C.
- Zero Drift: Maintain load height overnight.
- Hydrolysis Resistant: Won’t degrade in humid port environments.
- Exact Fit: Kits for Kalmar, Sany, Konecranes cylinders.
PURITY MATTERS: OEM VS. GENERIC
Injector failure is 90% caused by dirty fuel. See why Zhenke OEM-spec filters are the only choice for Volvo & Cummins Engines.
| Specification | Zhenke (OEM Grade) | Cheap Aftermarket | Impact |
|---|---|---|---|
| Micron Rating | 2 Microns (Absolute) | 10-20 Microns | Injector Tip Erosion |
| Filter Media | Synthetic Multi-Layer | Cellulose (Paper) | Clogs Quickly / Collapses |
| Water Separation | 99.9% Efficiency | < 80% Efficiency | Fuel Pump Corrosion |
| Burst Pressure | 25 Bar | 10 Bar | Catastrophic Leakage |
ENGINE REBUILD TIMELAPSE
See a Volvo TAD1360VE go from worn-out to factory-fresh using our overhaul kit.
MAINTENANCE ZONES
SYSTEM FAULT DIAGNOSIS
Don’t Gamble with Gravity.
Using non-certified parts for load-bearing components (like twistlocks, lift chains, or brake systems) creates a liability risk. Zhenke parts meet or exceed OEM safety factors.
Never check for pinhole leaks with your hands. Hydraulic fluid at 200 bar can penetrate skin. Always use cardboard. Replace worn hoses immediately.
Squealing brakes on a 100-ton Reach Stacker indicate immediate danger. Inspect friction discs and caliper seals every 2000 hours.
SERVICE TERMINOLOGY
SYSTEM FAULT DIAGNOSIS
Don’t Gamble with Gravity.
Using non-certified parts for load-bearing components (like twistlocks, lift chains, or brake systems) creates a liability risk. Zhenke parts meet or exceed OEM safety factors.
Never check for pinhole leaks with your hands. Hydraulic fluid at 200 bar can penetrate skin. Always use cardboard. Replace worn hoses immediately.
Squealing brakes on a 100-ton Reach Stacker indicate immediate danger. Inspect friction discs and caliper seals every 2000 hours.